Skip to content
PTO Ski & Snowboard
Dalbello Veloce 110 MV Ski Boots Mens 20251 / 7
On Sale

Dalbello

Dalbello Veloce 110 MV Ski Boots Mens 2025

$479.20$599.0020% OFF

Boots Return Policy

All boots are subject to a 5% restocking fee if returned. Please ensure correct sizing before purchasing — contact us for help with fit.

In Stock — Ready to Ship

1
Free shipping on US orders $100+ 15-day returns Authorized dealer Price match — authorized US retailers

Description

The Veloce 110 MV is Dalbello's mid-range performance boot — a traditional overlap shell built around a 100mm last and a 110 flex that sits squarely in intermediate-advanced territory. The dual-injected PU shell uses a softer compound in the upper cuff for easier entry and a firmer lower shell for direct power transmission, so when you press into a carve the energy actually reaches the ski rather than disappearing into flex. Four micro-adjustable V22 aluminum buckles let you dial tension zone by zone, and the 40mm power strap across the top of the cuff holds everything taut on hard snow without overcranking. The VELOCE IF liner uses Contour 5 technology — five pre-shaped zones around the navicular, ankle bones, and sixth-toe area — that reduces pressure points out of the box. Pair that with MyFit moldability (both shell and liner can be heat-fit), and a good bootfitter can take this boot from snug-but-manageable to genuinely custom in a single session. GripWalk soles come pre-mounted, which makes the walk from the parking lot to the lift considerably less sketchy.

This boot is built for a skier who already charges groomers consistently and wants more response than an entry-level boot can give — intermediate-to-advanced recreational skiers with a medium-width foot (roughly 100mm across the forefoot) will find it honest and supportive without being punishing. That said, there are two clear mismatches worth naming. If your foot runs narrow (LV, 97–98mm), the MV last will leave you swimming regardless of buckle tension, and a low-volume option like the Dalbello Veloce 100 LV or a Lange RS line will fit you far better. Conversely, if your foot is genuinely wide (102mm or more), this shell won't buckle down comfortably and you'll need an HV or wide-last boot. On the flex side, strong expert skiers or aggressive all-mountain skiers should look at the Veloce 120 MV or 130 MV — a 110 flex can feel vague underfoot at speed for a skier who drives hard. Come in for a proper shell-check before ordering; last width and foot volume matter more than any single spec on the page.

Flex 110
Last Width 100mm
Shell Dual-injected racing PU
GripWalk Yes
Buckles 4 V22 buckles + 40mm powerstrap
Best For Advanced — piste performance with precise power transfer

Details

Type
Ski Boots
Vendor
Dalbello
UPC / GTIN
8050440171879
$479.20$599.0020% OFF

25.5

PTO ReviewSki Boots

Dalbello Veloce 110 MV

Veloce family · 24/25Walk Mode

Flex 110

Stiff
60708090100110120130
SofterStiffer

Last Width

100mmMedium (100–101mm)

The Veloce 110 MV is Dalbello's answer for skiers who want a traditional overlap boot with real walk mode at a reasonable price. The dual-injected PU shell puts softer plastic up top for easier entry and stiffer material down low where you need precision. At 100mm it's true medium volume — snug enough for control, open enough that most average feet won't need major shell work.

Compared to the Cabrio MV 100, you trade the three-piece flex feel for walk mode and a slightly narrower last. The Contour 5 shell shaping adds relief at the navicular, both ankles, and sixth toe zone, which reduces common pressure points. A solid daily driver for advanced all-mountain skiers.

Strengths

  • +Walk mode — a real cuff release for lodge walks and short bootpacks
  • +Dual-injected shell: softer entry zone, firmer lower for power transfer
  • +Contour 5 shell shaping reduces pressure at five common hot spots

Best For

Advanced all-mountain skiers who want walk mode, a 100mm medium fit, and solid power transfer without paying for BOA.

Limitations

  • No BOA — purely buckle closure at this price tier
  • 110 flex may overwhelm lighter skiers under 150lb
  • Hyperlight cuff is functional but basic compared to the Veloce Space line

Not For

Beginners (flex is too stiff), wide feet (102mm+ → look at Veloce Max), or anyone wanting BOA convenience (→ Veloce Space 110).

Common Questions

How does the Veloce 110 MV compare to the Veloce Space 110?
The Space 110 adds BOA single-dial closure, the IF Space liner with Ankle Sense tech, and Quick Fit Panel entry — for about $36 more. The MV 110 uses traditional buckles and a simpler liner. If easy on/off and micro-adjustability matter to you, go Space.
What does "dual-injected" shell mean?
The upper cuff area uses a softer PU plastic so you can flex in and out easily, while the lower shell uses a firmer compound for precise ski control. You get two different densities in one boot without a seam or separate tongue piece.
Is the Veloce 110 MV compatible with my bindings?
It ships with GripWalk soles (ISO 23223), which need a binding certified to accept them — GripWalk-specific, MNC, or MN. They will not work in a binding that only accepts an ISO 5355 alpine sole. Have a technician read the certified sole types off your binding before you buy.
PTO Team · 2026-05