Tecnica Mach1 MV 130 vs LV vs HV — which last should I choose?

All three share the same all-new platform, 130 flex, C.A.S. shell and liner, and carbon/Grilamid cuff; only the last differs. MV is 100 mm for a medium foot, LV is about 98 mm for a narrow, low-volume foot, and HV is about 103 mm for a wide foot or high instep. Choose by the shape of your foot, not by ability, and get shell-fitted to confirm.

Is the 2026/27 Mach1 MV 130 different from the 2025/26 model?

Yes — this is the all-new, reimagined generation, not a graphics refresh. Tecnica changed the cuff to a co-injected carbon/Grilamid blend, dropped the weight to 1905 g per boot, and reworked the T-Drive spine so the flex holds up as temperatures drop. The 100 mm last, 130 flex, GripWalk sole and four-buckle layout carry over.

What bindings work with the Mach1 MV 130's GripWalk sole?

The GripWalk (ISO 23223) sole needs a GripWalk-compatible or MNC/Multi-Norm binding that accepts GripWalk soles; a conventional alpine ISO 5355 binding without GripWalk certification will not. The soles are user-replaceable wear parts, but the mounted sole and the binding must always match. Have a certified technician confirm the match and set your release before skiing.

Is the 100 mm last wide enough for a wide foot?

No — 100 mm is a true medium-volume last, and the Quick Instep panel eases entry without widening it. A bootfitter can punch a problem zone, but punching adjusts a fit rather than rebuilding a last, so a genuinely wide foot or high instep belongs in the Mach1 HV 130 (about 103 mm). A narrow foot goes the other way, to the LV 130.

Is the Mach1 MV 130 too stiff for an intermediate?

Most likely, yes. Tecnica positions the MV 130 for expert skiers, and a 130 flex wants a strong, aggressive skier who actively drives the cuff. A cautious intermediate should look at a softer flex on the same 100 mm last, such as the Mach1 MV 120.

1 / 7

Tecnica

Tecnica Mach1 MV 130

$849.99

Boots Return Policy

All boots are subject to a 5% restocking fee if returned. Please ensure correct sizing before purchasing — contact us for help with fit.

Size: 26.5

In Stock — Ready to Ship

Free shipping $100+ 15-day returns Authorized dealer

Description

The Tecnica Mach1 MV 130 is a four-buckle overlap boot built for expert-level skiers who need a true 130-flex shell without giving up fit comfort for a medium-volume foot. The 100mm last is genuinely mid-volume — wide enough for a normal foot with a reasonable instep, but not the boot you want if your feet run wide in the forefoot or high in the arch. The four micro-adjustable aluminum buckles with Lift Lock plus the 45mm elastic powerstrap let you dial a precise, progressive lockdown: the buckles set the overall shape, the powerstrap tightens the instep without creating hot spots. The C.A.S. (Custom Adaptive Shape) liner is thermomoldable — we heat it here in the shop, it conforms to the exact contours of your foot, and the result is noticeably less break-in time and fewer pressure points from day one. The shell itself is also C.A.S.-compatible for targeted punching and thermoforming where needed. Tecnica's T-Drive carbon connector stiffens the torsional connection between upper and lower shell, so when you load the outside edge on a hard carve, the energy goes where you want it rather than dissipating in flex between shell components. The GripWalk sole (ISO 23223) means you can actually walk across a parking lot without sliding, and it's compatible with GripWalk-certified bindings.

This boot belongs on the feet of a strong advanced to expert skier — someone who skis hard, skis often, and has developed enough technique to actually use a 130 flex rather than fight it. If you are a solid intermediate who gets out ten days a season, a 130 will punish your shins and tire your legs before lunch; the Mach1 MV 110 or MV 120 is the honest fit for that skier. Volume is the other conversation: if you have a wide, flat foot (think 103mm or wider at the ball), the MV last will compress your foot laterally and create persistent pain on the inside or outside edge — the Mach1 HV 130 with its 103mm last exists precisely for that reason. Conversely, if you have a genuinely narrow, low-volume foot, the LV 130 at 98mm will hold your heel far more securely. Come in for a fitting before you commit; flex and last width have to match your foot and your actual ski strength, not just your ambition level, and getting those two things right is the entire job of a bootfitter.

Flex	130
Last Width	99-100mm (medium)
Weight	2,070g per boot
Shell	C.A.S. PU with Quick Instep
GripWalk	Yes
Buckles	4 with Lift Lock + 45mm Power Lock strap
Best For	Expert — race-level stiffness in medium volume

Details

Type: Ski Boots
Vendor: TECNICA
SKU: 101931G2-381-26.5

PTO ReviewSki Boots

Tecnica Mach1 MV 130

Mach1 family · 26/27

Flex 130

Very Stiff

60708090100110120130

SofterStiffer

Last Width

100mm— Medium (100–101mm)

The Tecnica Mach1 MV 130 is the all-new, reimagined version of a benchmark medium-volume 130, and it is a genuinely different boot from the 2025/26 Mach1 MV 130 you may still see listed — not a graphics-year update. Tecnica rebuilt the cuff in a co-injected carbon and Grilamid blend that is thinner, stiffer and closer-wrapping, dropping the boot to 1905 g per boot, roughly 165 g lighter than the boot it replaces. The redesigned T-Drive spine, the backbone linking the lower shell to the cuff, is tuned for a smoother, progressive flex that stays consistent as temperatures swing, with a quick snap back to center between turns.

The Mach1's real argument is fit. The C.A.S. PU shell is anatomically pre-shaped yet still heat-moldable and punchable, and the Full C.A.S. liner molds from the tongue to the forefoot through the ankle, so a bootfitter can work both the shell and the liner — which is why bootfitters rate this line highly. Treat the purchase as including a fitting session: the shell is built to be ground and punched and the liner to be baked, despite the out-of-the-box-fit language.

The Mach1 MV 130's on-snow feel here is platform inference, not a test of this boot. Independent testing of the all-new generation so far is of the LV 130 sibling (about 98 mm), which shares the spine, cuff, shell and liner; testers describe a firm-but-progressive 130 that holds an edge on hard, icy snow and drives skis at speed. The mechanisms transfer to the MV, but the 100 mm last will fit and feel different from the 98 mm LV, and we did not find an independent on-snow test of the MV 130 specifically.

The Mach1 MV 130 is a fixed-cuff alpine boot for the frontside and hard all-mountain; its GripWalk soles help you walk the lot and lift line, but this is not a walk-mode or touring boot. It runs four aluminum buckles and a cam power strap, and the all-new design deliberately dropped BOA — if you specifically want an even, micro-adjustable lower-shell wrap, the Salomon S/Pro Supra Dual BOA 130 offers it at the same 100 mm class. Forward lean is fixed at 13.3 degrees with nothing to tune; a skier who needs to adjust stance can look at the Atomic Hawx Prime 130 and its 13/15/17-degree lean.

The Mach1 MV 130 sits in the middle of Tecnica's LV/MV/HV ladder, which means its own siblings beat it at each end of the foot-shape spectrum: a narrow, low-volume foot belongs in the LV 130, and a wide foot or high instep in the HV 130 (about 103 mm). Only a true 100 mm foot gets the most out of this shell. Sizes run 24.5 to 30.5 in half sizes, and Tecnica does not publish the reference size behind either the 100 mm last or the 1905 g figure, so read both as a class rather than a guarantee — and get shell-fitted before you commit.

Strengths

+Carbon/Grilamid cuff drops about 165 g per boot versus prior gen
+C.A.S. shell and liner both heat-mold and punch for full customization
+Redesigned T-Drive spine tuned for a smooth, progressive flex
+GripWalk soles are standard and user-replaceable wear parts

Best For

Advanced-to-expert skiers with a genuine medium-volume (~100 mm) foot who want a stiff, progressive 130 for the frontside and hard all-mountain — and who treat a bootfitting session, heat-mold and punch, as part of the buy.

Limitations

−No independent on-snow test of the MV yet; feel inferred from LV
−Fixed 13.3° forward lean and no BOA — nothing to tune
−True 100 mm medium last — narrow and wide feet go elsewhere
−Tecnica does not publish the weight's reference size

Not For

Narrow, low-volume feet — those go to the Mach1 LV 130 — and wide feet or high insteps, which belong in the HV 130; 100 mm is a true medium last, and the Quick Instep eases entry without widening it. Not for beginners or cautious intermediates: 130 is stiff and demanding, with no soft-flex trick hiding in it. Not for skiers who want BOA or adjustable forward lean, or who need a walk mode. And not for anyone dropping these into bindings without a certified technician confirming the GripWalk sole match first.

Common Questions

Tecnica Mach1 MV 130 vs LV vs HV — which last should I choose?: All three share the same all-new platform, 130 flex, C.A.S. shell and liner, and carbon/Grilamid cuff; only the last differs. MV is 100 mm for a medium foot, LV is about 98 mm for a narrow, low-volume foot, and HV is about 103 mm for a wide foot or high instep. Choose by the shape of your foot, not by ability, and get shell-fitted to confirm.
Is the 2026/27 Mach1 MV 130 different from the 2025/26 model?: Yes — this is the all-new, reimagined generation, not a graphics refresh. Tecnica changed the cuff to a co-injected carbon/Grilamid blend, dropped the weight to 1905 g per boot, and reworked the T-Drive spine so the flex holds up as temperatures drop. The 100 mm last, 130 flex, GripWalk sole and four-buckle layout carry over.
What bindings work with the Mach1 MV 130's GripWalk sole?: The GripWalk (ISO 23223) sole needs a GripWalk-compatible or MNC/Multi-Norm binding that accepts GripWalk soles; a conventional alpine ISO 5355 binding without GripWalk certification will not. The soles are user-replaceable wear parts, but the mounted sole and the binding must always match. Have a certified technician confirm the match and set your release before skiing.
Is the 100 mm last wide enough for a wide foot?: No — 100 mm is a true medium-volume last, and the Quick Instep panel eases entry without widening it. A bootfitter can punch a problem zone, but punching adjusts a fit rather than rebuilding a last, so a genuinely wide foot or high instep belongs in the Mach1 HV 130 (about 103 mm). A narrow foot goes the other way, to the LV 130.
Is the Mach1 MV 130 too stiff for an intermediate?: Most likely, yes. Tecnica positions the MV 130 for expert skiers, and a 130 flex wants a strong, aggressive skier who actively drives the cuff. A cautious intermediate should look at a softer flex on the same 100 mm last, such as the Mach1 MV 120.