1 / 5Tyrolia Attack LYT 11 GW Ski Bindings
In Stock — Ready to Ship
Description
The Tyrolia Attack LYT 11 GW is an alpine ski binding with a 3-11 release-value adjustment range, weighing 905 g per binding on a 17 mm stand. It sits in Tyrolia's Attack LYT freeski family and pairs the FR LYT toe with the SX FR heel.
Tyrolia calls the FR LYT toe "15% lighter" - the brand's own comparison, with no baseline stated on the product page. Boot compatibility is stated plainly: the binding accepts adult Alpine boots (ISO 5355 Type A) and adult GripWalk boots (ISO 23223 Type A); the toe height adjusts to the boot automatically, and no sole-height adjustment is needed. No other sole standard appears on the official page - no junior norms, no touring norms - and no walk or pin mechanism is mentioned anywhere on this binding.
Within the family, the Attack LYT 12 shares the FR LYT toe and the 17 mm stand height but runs 3.5-12 with the NX FR heel and weighs 960 g per binding; the non-LYT Attack 14 GW runs 4-14 and is also in our lineup. Tyrolia also sells a separate Attack LYT 11 GW DEMO for rental-style quick readjustment - a different catalog item, not this product.
We carry it in pink with 95 mm or 110 mm brakes; at line level Tyrolia offers four colors, and brake choice depends on color and configuration. Pick a brake equal to or slightly wider than your ski's waist - tell us the ski and we will match it. Per Tyrolia's own disclaimer, the binding must be mounted, adjusted and serviced by an authorized retailer or technician before use - work we do in the shop.
Specs
- DIN / Adjustment Range: 3 - 11 (set by a certified technician)
- Toe / Heel: FR LYT toe / SX FR heel
- Stand Height: 17 mm
- Weight: 905 g per binding (manufacturer stated)
- Boot Compatibility: Adult Alpine (ISO 5355 Type A) and GripWalk (ISO 23223 Type A) soles, automatic toe height adjustment
- Brake Widths at PTO: 95 / 110 mm (in box)
- Color at PTO: Pink
Details
- Type
- Ski Bindings
- Vendor
- Tyrolia
- SKU
- 114656
- UPC / GTIN
- 008466146560
Pink / 95
Tyrolia Attack LYT 11 GW
Attack LYT family · 26/27
DIN 3–11
Brake Widths
Choose a brake equal to or slightly wider than your ski waist
Boot Sole
905 g per binding
The number that decides the Attack LYT 11 GW purchase is its 3-11 adjustment range. The range is the manufacturer's; the release value inside it is determined, set and verified by a certified technician. Land above the range and the line goes higher: the Attack LYT 12 (3.5-12) and the Attack 14 GW (4-14), which we also carry.
Inside that range the LYT 11 weighs 905 g per binding, standing 17 mm off the ski. The LYT 12 is 55 g heavier at the same height; the LYT 9 is 845 g but stands 21 mm. Tyrolia publishes no ramp angle, elastic-travel figure or screw pattern for this model - spec-sheet comparisons run out early.
Best For
All-mountain and freestyle skiers on adult Alpine (ISO 5355 Type A) or adult GripWalk (ISO 23223 Type A) soles, whose technician-set release value falls within 3-11 and who want a light binding with a low stand height.
Not For
Anyone whose certified-technician release setting lands above the 3-11 range - the LYT 12, Attack 14 GW and Attack 17 GW go higher. Boots outside the two listed adult sole norms: no junior or touring soles appear in Tyrolia's compatibility text, and there is no walk mechanism or pin here. Shops or families needing quick readjustment across many boots are better served by the Attack LYT 11 GW DEMO, its own catalog item.
Common Questions
- What is the difference between the Attack LYT 11 GW and the Attack LYT 12 GW?
- Both run the FR LYT toe and share the same 17 mm stand height. The LYT 12 pairs it with the NX FR heel, adjusts across 3.5-12 instead of 3-11, and comes in at 960 g per binding against 905 g. Pick by the release range your technician sets, not by the badge.
- Does the Attack LYT 11 GW work with GripWalk boots?
- Yes. Tyrolia's official page lists adult GripWalk soles (ISO 23223 Type A) and adult Alpine soles (ISO 5355 Type A) as the two accepted norms, with nothing else listed. Toe height adjusts automatically, so switching between the two needs no sole-height setup.
Compare — Similar DIN Range
Other bindings at PTO in the DIN 3–11 range






