Skip to content
PTO Ski & Snowboard
Stockli Laser SL FIS Skis 2026/20271 / 3
On SaleSold Out

Stöckli

Stöckli Laser SL FIS Skis 2026/2027 (also known as Stockli)

$1807.20$2259.0020% OFF

Size: 165

Plate: WRT-D20

Binding: WRT 16

Size guide

Sold Out

Need binding mounting?

We’ll mount your bindings and set your DIN. Free binding mounting when you order online.

1

Notify me when this is back in stock

Free shipping on orders $100+ (lower 48) 15-day returns Authorized dealer Price match — authorized US retailers
Compare with other models

PTO Verdict

“Phenomenal ice grip — locks into hardpack with surgical accuracy and explosive rebound turn-to-turn.”

Best for: FIS/masters racers who demand unwavering edge hold and turn-to-turn acceleration. Expert piste carvers focused on short, high-tempo arcs on firm snow. Athletes training gates or competing in slalom.

Not for: Recreational skiers, intermediates, or anyone seeking forgiveness. If you want race-like precision without the full demands, the standard Laser SL is the better choice.

Read the full review ↓

At a Glance

Terrain

Carving

Ability Level

Advanced
Expert

Description

The Laser SL FIS is Stöckli's homologated slalom race ski — built to FIS specification for gate racing, not recreational skiing. Two sheets of titanal over a race core load up and release out of each turn for the snap and rebound a slalom racer needs, full-length racing edges hold on injected, icy race surfaces, and the geometry meets FIS slalom homologation. This is a competition tool.

It's for ski racers and serious gate trainers who have the technique, the fitness, and a reason to ski a homologated SL ski — it demands an active, aggressive, precise slalom style and gives nothing back to a passive skier. If you're not training or racing gates, this is the wrong ski: for sporty short-turn carving on the open hill, the standard Laser SL or the Laser SC is what you actually want.

Stöckli Laser SL FIS

Details

Type
SKI
Vendor
Stöckli
$1807.20$2259.0020% OFF

165 / WRT-D20 / WRT 16

Gear Builder

See this with matching bindings

Build Your Setup →
PTO ReviewCarving

Stöckli Laser SL FIS

By PTO Ski Team, Based on the manufacturer's published specs and catalog

Spec analysis · Analysis dated

CarvingParkPlayfulnessForgivenessStabilityPowder
Carving
Park
Playfulness
Forgiveness
Stability
Powder

These 10-point scores express PTO's editorial assessment of suitability for each use. They are not customer ratings or instrumented measurements; the analysis below explains the trade-offs.

Specs

Waist
66mm
Sidecut
Not published — Stöckli prints "FIS" in the dimension column for its FIS skis rather than tip/waist/tail figures
Turn radius
12.2 m (156 cm) · 12.2 m (160 cm) · 12.4 m (165 cm)
Bevel
Base 0.5° / side 3.0° (factory)
Profile
Full camber, no rocker
Core
Race Core with titanal laminates (thicker/stiffer than SL)
Construction
Sandwich, phenol sidewalls with carbon black, Flex Torsion Control (FTC), Carbon Power Turn, racing graphite base
Lengths
156 / 160 / 165 cm

The take

“Phenomenal ice grip — locks into hardpack with surgical accuracy and explosive rebound turn-to-turn.”

The Laser SL FIS is Stöckli's full-spec slalom race ski — FIS-legal radius, phenol sidewalls, and a significantly stiffer core profile than the standard Laser SL. This is a competition tool built to the same standards as what runs gates on the World Cup circuit.

The phenol sidewalls with carbon black deliver harder, more direct power transfer than standard ABS sidewalls. The thicker core underfoot creates a stiffer flex pattern that rewards explosive, cross-under slalom technique with vice-like grip and instant rebound. Edge-to-edge transitions happen in a split second.

What keeps it from being punishing is the Stöckli refinement. Even as a FIS ski, it has that signature smoothness and damping. It's stiffer than the standard SL but not harsh — it absorbs vibration and delivers feedback cleanly instead of rattling your teeth. That said, it demands serious technique and fitness. Passive or backseat skiing is immediately punished.

Compared to the standard SL: FIS-homologated geometry with sidecut radii from 12.2m (156cm) to 12.4m (165cm). The FIS is heavier (~3.5kg vs ~3.2kg per pair), stiffer, has phenol sidewalls, and only comes in 3 lengths. The standard SL is the better choice for 90% of skiers. The FIS is for racers who need FIS compliance and maximum edge grip.

Bindings we'd pair with it

Mount point: Stöckli WRT plate system (pre-mounted). Our pick: Stöckli WRT 12.

  • Stöckli WRT 12Standard race

    WRT-D20 plate with WRT 12 binding. DIN 4-12. Standard for club and masters racers.

  • Stöckli WRT 16Higher DIN

    WRT-D20 plate with WRT 16 binding. DIN 6-16. For stronger, more aggressive racers.

  • Stöckli WRT 24Competition

    WRT-D20 plate with WRT 24 binding. DIN 7-24. Full race DIN for competitive athletes.

The SL FIS uses the WRT-D20 race platform exclusively. SRT-Speed-D20 plate is not available for this model.