Skip to content
PTO Ski & Snowboard

Gear Builder

See this with matching bindings

Build Your Setup →
PTO ReviewCarving

Stöckli Laser MP

By PTO Team, Based on official Stöckli specs plus the one cited independent on-snow test · Spec analysis + one cited independent ski test on this ski

CarvingParkPlayful.Forgive.Stabili.Powder
Carving
Park
Playfulness
Forgiveness
Stability
Powder

The take

A lighter, softer-flexing women's carver with race-line grip - quick and sharp on firm groom, out of its depth the moment it softens.

The Stöckli Laser MP is the sportier half of Stöckli's women's piste range, and the whole ski follows from a single trade: it keeps the race models' edge hardware but rides on a lighter, softer platform in place of the heavier Race Core and the carbon of the Laser WRT. MP means Motion Performance - race-line edge grip a lighter or less powerful skier can reach without race-line effort. It debuted for the 2026 model year and carries into 26/27 unchanged - same shape, radii, construction names and article number - so its debut evidence still describes today's ski.

The one independent on-snow test we found - four women testers at a single outlet - scored it highest exactly where it is aimed: quick edge-to-edge and strong edge grip on firm groom, with stability rated well despite the weight-saving build. One tester, no self-described carver, called it the ski that turned her into one. That tracks with the construction: a Piste Core Light and SF Softflex lower the effort to bend and tip the ski, while racing sidewalls Stöckli rates 10% harder, a 1.0° base / 2.0° side race tune and repositioned edge-contact points keep the bite. It stays quick because the radius is short - 10.7 m at 148 cm out to 12.8 m at 160.

The limits are just as clear, and the same test was blunt about them. Reviewed as fully cambered with no rocker, the MP wants to be on edge; run it flat and, in the testers' words, that is not its strength. Float scored its weakest - at 67 mm the moment the snow softens it goes reluctant. Forgiveness is mid-pack: softer than the Laser WRT, but still a narrow cambered carver that punishes passive, backseat skiing. And the evidence base is honestly thin - one outlet, however consistent, not a chorus of tests. Weight and metal-sheet count are nowhere official; the third-party 'two sheets of Titanal' claim is not confirmed by Stöckli, so we do not print it.

Within Stöckli's line, the MP is beaten at their own jobs by two siblings. For effortless all-day comfort and tolerance of softer, variable snow, the wider, tail-rockered Laser MX (71 mm) is deliberately the easy one. For top-end power and stability at speed, the unisex Laser WRT runs the heavier Race Core and carbon in longer lengths - though its shape is close, not identical (119-67-101 mm versus the MP's 118-67-100), and 'women's WRT' is a reviewer's framing, not Stöckli's. Women who want that Race Core in a longer women's package have the Orea SC (70 mm).

Sizing is simple because the shape never changes - length sets the radius. PTO stocks the 148, 154 and 160 cm; Stöckli also lists a 166 we did not order. Every MP rides on a plate, so it comes as a system with the SRT Speed D20 plate and SRT 12 Mint binding, mounted and adjusted to your boots in-shop by a technician.

Bindings we'd pair with it

Mount point: Plate system ski: sold as a complete system with the SRT Speed D20 plate and SRT 12 Mint binding. Stöckli’s workbook lists each binding on its own matched plate - SRT 12 Mint on an SRT Speed or SRT Carbon D20 plate, MC 12 on an MC Fullflex D20 plate, MC 11 on an MC D20 plate - so the plate and binding are paired, not mixed. Third-party flat bindings do not fit the plate system. Our pick: Stöckli SRT 12 Mint on the SRT Speed D20 plate (the PTO system pairing).

  • Stöckli SRT 12 Mint + SRT Speed D20 plateThe PTO system pick

    How PTO sells the Laser MP - Stöckli's SRT 12 Mint binding on the SRT Speed D20 plate, mounted and adjusted to your boots in-shop by a technician. Stöckli also pairs the SRT 12 Mint with its SRT Carbon D20 plate.

  • Stöckli MC 12 + MC Fullflex D20 plateStöckli's workbook alternative

    One of Stöckli's own documented plate-system pairings for the MP - the MC 12 binding rides its matched MC Fullflex D20 plate, fitted in-shop, not a third-party binding.

  • Stöckli MC 11 + MC D20 plateStöckli's workbook alternative

    Stöckli's other documented MC pairing for the MP - the MC 11 binding on its matched MC D20 plate, fitted in-shop.

The Laser MP is a plate system; mounting and setup are done in-shop by a technician. Third-party flat bindings are not compatible.

Common Questions

What is the difference between the Stöckli Laser MP and the Laser MX?
The MP is the sporty one - 67 mm, racing sidewalls, a 1.0° base / 2.0° side race tune and, as reviewed, full camber for a sharper carve on firm snow. The MX is the comfort one - 71 mm, tail rocker and a softer 1.5° base tune for easier all-day skiing across more varied snow. Same women’s Piste Core Light, opposite intent.
Is the Stöckli Laser MP a good powder ski?
No - it is a firm-snow piste carver. At 67 mm, reviewed as fully cambered with no rocker, its float is low; the one independent on-snow test scored float its weakest category. Soft and deep days are survival mode, not its home.
Is the Laser MP good for beginners or intermediates?
Not for beginners - the narrow waist can be tricky and it wants edge angle, so it is not a learning ski. Its natural buyer is a sporty advanced intermediate through expert; the Softflex build genuinely lowers the effort for lighter skiers moving up into carving, but it still punishes passive, flat skiing.
Is the Laser MP the same as a women’s Laser WRT?
Not quite. 'Women's WRT' is a reviewer's framing, and the two are close but not identical: 118-67-100 mm for the MP versus 119-67-101 for the WRT, in different length runs. The MP also drops the WRT's beech-heavy Race Core and carbon, moving instead to the lighter Piste Core Light and Softflex build.
What lengths does the Stöckli Laser MP come in, and how do I choose?
PTO stocks the 148, 154 and 160 cm; Stöckli also lists a 166 we did not order. The shape is 118-67-100 mm in every length, so length sets the radius - 10.7 m, 11.7 m and 12.8 m in order. Shorter quickens the turn; longer adds a little stability in bigger arcs.
How much does the Stöckli Laser MP weigh?
Stöckli does not publish a weight for the Laser MP, or a metal-sheet count - the workbook prints neither for its piste skis - and we do not quote third-party scale figures in their place.