Skip to content
PTO Ski & Snowboard
Stöckli Laser SX 26/271 / 2
Pre-order

Stöckli

Stöckli Laser SX Skis 2026/2027 (also known as Stockli)

$1499.00

Pre-order · Ships September 2026

Need binding mounting?

We’ll mount your bindings and set your DIN. FREE with full setup (ski + boots + bindings).

1
Free shipping on US orders $100+ 15-day returns Authorized dealer Price match — authorized US retailers
Compare with other models

PTO Verdict

The widest and longest-turning ski in Stöckli's Laser piste range — a redesigned 74 mm comfort carver that trades race bite for all-day range.

Best for: Piste skiers who want one comfortable, wide-range carver and prefer all-day ease to race-build effort. It suits medium-to-long-turn skiers at moderate-to-fast speed — the Laser SX runs the longest radius in the line — who value low-input, forgiving manners on groomed and variable hard snow over maximum edge bite. Stöckli's own brief calls it a genuine all-rounder among piste skis.

Not for: Powder and off-piste skiers: at 74 mm on a pure on-piste geometry the Laser SX has no float, and the wider range Stöckli talks about is range within the groomers, not off them. Short-turn and slalom-rhythm skiers: the radius bottoms out at 13.1 m, and quick edge-to-edge belongs to the Laser CX or the shorter Laser SL. Skiers chasing race-level grip and power: there is no Race Core, no carbon, and no racing sidewall here, and the 1.5° comfort base bevel is not the 1.0° race tune of the SC and WRT — that bite lives on those skis, not this one. Anyone who needs a published on-snow test before buying should wait: this generation is completely redesigned — every existing Laser SX review is of the older, narrower ski and does not apply. And Stöckli lists no skier level of its own; read this as an intermediate-to-advanced piste ski, inferred from its mechanics rather than measured on snow.

Read the full review ↓

At a Glance

Terrain

Carving

Ability Level

Beginner
Intermediate
Advanced
Expert

Description

Stöckli Laser SX, 74 mm underfoot, is the wide-body comfort carver of the Swiss brand's Laser groomer range — the broadest waist among those piste skis, and fully re-engineered for 26/27. One 122-74-103 mm profile carries through every size, with the turn radius climbing by length from 13.1 m at 158 cm to 16.4 m at 178. That places it at the long end of the family's turn shapes, happiest linking rounded medium and longer carves at a relaxed-to-brisk pace.

What makes it easygoing is a lighter, poplar-forward Piste Core Light beneath a notched-Titanal top layer Stöckli calls Turtle Shell 2.0: low-speed steering stays light and neutral, and the metal firms up as the tempo rises. A rockered tail loosens the finish of each arc, the shovel's Adaptive Contact Length feeds in more edge the harder the ski is rolled over, and slimmer Solid Metal Edge Light rails ride a graphite race base. The factory grind is set soft for comfort rather than sharpened for racing, and Stöckli lists no weight.

Think of it as a one-ski groomer answer for someone who prizes ease over a race ski's demands and skis rounder, longer turns more than snappy short ones. It has no business off the trail — at 74 mm the "wide range of uses" means variety on the piste, not float — and anyone hunting quick slalom turns or hard race grip is better pointed at the tighter Laser CX or a Race Core model. Worth flagging: this is a clean-sheet design and no outside tester has been on it yet, so the picture here rests on Stöckli's engineering and on where the ski lands beside its stablemates.

PTO carries the Laser SX as a complete setup — an SRT 12 petrol binding set on an SRT Speed D20 plate — and as a bare predrilled ski for those bringing their own. Fitting and adjustment happen at the counter with a technician, sized to your boot. Expect premium pricing.

Specs

  • Lengths (cm): 158 / 165 / 172 / 178
  • Sidecut (tip-waist-tail, mm): 122-74-103
  • Turn radius: 158 cm: 13.1 m · 165 cm: 14.5 m · 172 cm: 15.9 m · 178 cm: 16.4 m
  • Construction: Piste Core Light (Poplar/Beech)
  • Construction: TS2.0 Turtle Shell 2.0
  • Construction: SME Light (Solid Metal Edge Light)
  • Construction: TR Tail Rocker
  • Construction: ACL Adaptive Contact Length
  • Binding option: SRT Speed D20 plate + SRT 12 petrol
  • Manufacturer article: 41010628-20

Details

Type
SKI
Vendor
Stöckli
SKU
41010628-20-172
$1499.00

172 / None

Gear Builder

See this with matching bindings

Build Your Setup →
PTO ReviewCarving

Stöckli Laser SX

By PTO Team, Based on official Stöckli specs and the 26/27 workbook · Spec analysis

Stöckli Laser SX 26/27 skis, topsheet pair with the SRT 12 binding mounted
Stöckli Laser SX with the SRT 12 petrol on the SRT Speed D20 plate, 26/27 (official product image).
CarvingParkPlayful.Forgive.Stabili.Powder
Carving
Park
Playfulness
Forgiveness
Stability
Powder

The take

The widest and longest-turning ski in Stöckli's Laser piste range — a redesigned 74 mm comfort carver that trades race bite for all-day range.

The Stöckli Laser SX is the comfortable, wide-range carver of Stöckli's Laser piste range — the widest ski in that group at 74 mm, and, for 26/27, a completely redesigned one. The shape is 122-74-103 mm and holds across every length, so length alone sets the radius: 13.1 m on the 158, 14.5 on the 165, 15.9 on the 172, 16.4 on the 178 — the longest-turning spread in the line, built for medium-to-long arcs at moderate-to-fast speed rather than short slalom turns. The redesign runs 4 mm wider than the previous ski, with a more tapered tip, and carries a new article number.

The comfort comes from the build. A Piste Core Light wood core — poplar-leaning for lower weight than the beech-rich Race Core — sits under a Titanal layer cut with Turtle Shell 2.0 openings; Stöckli's glossary says the cut-outs keep the ski torsionally neutral and easy to steer at low speed, then interlock at higher tempo for stability. Tail Rocker eases each turn's release, ACL Adaptive Contact Length grows the edge contact as the ski is tipped further onto its edge, and SME Light edges run on a Racing-Graphite base. The factory tune is 1.5° base and 2.0° side — a comfort grind, not the 1.0° base of the Race Core models. Stöckli publishes no weight, and no Titanal sheet count, so we quote neither.

Every published Laser SX review covers the previous, narrower ski, which sold through 2026, so none of it is carried here. The only outside word on the redesign so far is a dealer preview noting slightly softer tips and a firmer flex underfoot — and even that predates any real on-snow testing. What we can say is grounded in Stöckli's own mechanics and in how the SX sits against its siblings.

Within the Laser range the SX is the wide, long-turning end of the comfort pair. Its short-turn twin is the Laser CX (72 mm), the same Piste Core Light and Turtle Shell build but quicker between edges, with a radius that starts at 10.6 m — the pick if you want tight, snappy turns. For genuine race bite the Race Core skis are the answer: the Laser SC (70 mm) and Laser WRT (67 mm) add beech-rich cores, stiffer sidewalls and a 1.0° race bevel, and ask for the effort that buys. The women's line mirrors the SX in the Laser MX (71 mm).

Sizing is straightforward: the 122-74-103 shape never changes, so length sets the radius — shorter for a quicker feel, longer for stability at speed. PTO stocks the 172. The Laser SX comes as a system with the SRT 12 petrol binding on the SRT Speed D20 plate, and is also offered predrilled as a flat ski; either way the mounting and setup are done in-shop by a technician and matched to your boots. Pricing is premium.

Bindings we'd pair with it

Mount point: System version — comes with the SRT 12 petrol binding on the SRT Speed D20 plate; also offered predrilled as a flat ski. Mounting and setup done in-shop by a technician. Our pick: Stöckli SRT 12 petrol on the SRT Speed D20 plate (the system option).

  • Stöckli SRT 12 petrol / SRT Speed D20 plateThe system pick

    The binding and plate this system ships with. Mounting and setup are done in-shop by a technician, matched to your boots.

Stöckli's 26/27 workbook documents other plate-and-binding options for the Laser SX (a WRT, an SRT Carbon, and an MC configuration on their matching D20 plates); PTO's system ships the SRT 12 petrol on the SRT Speed D20 plate. Mounting and setup are done in-shop by a technician.

Common Questions

Is the Stöckli Laser SX redesigned for 26/27?
Yes — it is completely redesigned, with new geometry 4 mm wider than the previous ski and a new article number. Because the redesign is new, The read here comes from Stöckli's official mechanics and the in-line comparison rather than tester scores.
Is the Stöckli Laser SX a powder or off-piste ski?
No. At 74 mm with an on-piste geometry it is a groomer carver; the wider range of uses Stöckli describes is range within piste skiing, not float. For soft snow and off-trail, a wider ski is the right tool.
What is the difference between the Laser SX and the Laser CX?
Turn length. The SX is the wider, longer-radius carver — 74 mm, radius from 13.1 m — for medium-to-long arcs. The Laser CX (72 mm) starts shorter at 10.6 m and switches edges quicker for short turns. Both use the same comfort build.
How much does the Stöckli Laser SX weigh?
Stöckli publishes no weight for the Laser line — the workbook and stoeckli.ch both leave it blank — so we do not quote a third-party figure in its place.
What sizes does the Laser SX come in, and which does PTO stock?
It is built in 158, 165, 172 and 178 cm, all on the same 122-74-103 mm shape, so length sets the radius: 13.1, 14.5, 15.9 and 16.4 m in order. PTO stocks the 172.