1 / 2Stöckli Laser WRT Pro Skis 2026/2027 (also known as Stockli)
Pre-order · Ships September 2026
Need binding mounting?
We’ll mount your bindings and set your DIN. FREE with full setup (ski + boots + bindings).
PTO Verdict
“Race technology without a FIS license — a 67 mm carver that grips hard snow and rips slalom-to-GS turns, if you can drive it.”
Best for: Expert hard-snow carvers and ex-racers who want race technology without a FIS ski, and who will drive the front of the ski turn after turn. It suits skiers whose days are mostly on groomers and firm snow, chasing edge grip and the range to shift between slalom and GS turn shapes on one piste ski.
Not for: Skiers who want forgiveness or a ski that helps them progress: forgiveness was the WRT Pro's lowest-scored axis in that two-tester test, and it punishes a passive, backseat stance - it skis well only if you can drive it. Off-piste and powder-first skiers: at 67 mm with groomer-only terrain scores and float near the bottom of the card, deep snow is where it loses, and a wider ski is the tool. Dedicated short-turn slalom skiers: the narrower Laser SL is built for that, tailored by Stöckli to short, fast turns, while the WRT Pro is a broader multiturn. And anyone wanting an easy, all-day cruiser: this is a demanding expert carver, and the more accessible Laser SC is the friendlier Stöckli.
At a Glance
Terrain
Ability Level
Description
Stöckli's Laser WRT Pro is the Swiss brand's flagship consumer race ski — a 67 mm carver bred for hard snow and precise, high-speed turns. Stöckli builds it as a multiturn piste ski: agile enough for slalom-shaped turns, stable enough for giant-slalom arcs. The 119-67-101 mm sidecut holds across every length, so the size you pick sets the turn radius, from 12.3 m at 158 cm up to 16.0 m at 178 cm.
Underfoot sits Stöckli's Race Core, a beech-and-poplar wood core run heavier on beech for stability, capped with a Titec Pro Titanal surface for damping and grip — Stöckli lists no sheet count or full layup. Carbon fibers set around the binding zone, its Carbon Power Turn, load through the arc and snap back at the exit for a burst of acceleration, while black racing sidewalls, a graphite-rich race base and wide solid metal edges handle power transfer and glide. The factory tune is 1.0° base, 2.0° side; no camber or rocker figure is published.
This is an expert ski — independent testers rate it Expert, though Stöckli's page assigns no level. It rewards strong skiers who stay forward and keep working the ski; forgiveness was its weakest test score, so anyone still developing should skip it. At 67 mm it floats poorly and is scored for groomers only, so off-piste and powder skiers want a wider tool. Chasing quick, short slalom turns? The Laser SL specializes there. Want an easier daily carver? The Laser SC.
You can buy the Laser WRT Pro two ways. The system arrives pre-drilled, with a WRT 12 GW binding fitted to its WRT D20 plate — GripWalk-sole compatible — dialed to your boots in-store. Prefer the flat ski? We help you settle on a length and get it mounted. Expect flagship, premium pricing.
Specs
- Lengths (cm): 158 / 166 / 172 / 178
- Sidecut (tip-waist-tail, mm): 119-67-101
- Turn radius: 158 cm: 12.3 m · 166 cm: 13.7 m · 172 cm: 14.8 m · 178 cm: 16.0 m
- Construction: Race Core (Beech/Poplar)
- Construction: CPT Carbon Power Turn
- Construction: RSB Racing Sidewalls Black
- Construction: RBA Race Base
- Construction: SME Solid Metal Edge
- Construction: FEC Full Edge Contact
- Construction: Titec Pro (Titanal Technology Pro)
- Binding option: WRT D20 plate + WRT 12 GW black
- Manufacturer article: 41013228-20
Details
- Type
- SKI
- Vendor
- Stöckli
- SKU
- 41013228-20-166
166 / None
Stöckli Laser WRT Pro
By PTO Team, Based on official Stöckli specs plus cited independent ski tests · Spec analysis + cited independent ski tests
The take
“Race technology without a FIS license — a 67 mm carver that grips hard snow and rips slalom-to-GS turns, if you can drive it.”
At the top of Stöckli's Laser line sits the WRT Pro, a 67 mm piste carver on a 119-67-101 mm sidecut that stays the same in every length, with radii from 12.3 m on the 158 to 16.0 m on the 178. It is built on a Race Core of beech and poplar - more beech than Stöckli's all-mountain cores, for stability - under a Titec Pro Titanal surface. Carbon Power Turn strips sit under the core around the binding area, tensioning through the turn and releasing at the finish for what Stöckli calls extra acceleration out of the arc. Stöckli does not publish the sheet count or a weight.
In an independent 2026 ski test the WRT Pro drew top marks for hard-snow grip and stability from the tester on the 166, who summed it up as a ski for people who want to only carve; a second tester on the 172 scored it lower but read it the same way - it rips, playful enough for tight slalom turns and opening into GS arcs with ease, and stable across the speed range. The 2025 test the year before reached the same expert-carver verdict on the identical geometry. 26/27 is a carryover - the article number is unchanged - so those tests ran on this exact ski.
The limits are the flip side of that precision. Forgiveness sat at the bottom of the card in that two-tester test - the WRT Pro asks for expert input and does not cover for a passive, backseat stance. Its terrain is narrow: versatility scored mid-pack and float sat near the bottom, and the reviews list groomers as its only recommended terrain. At 67 mm it is a hard-snow tool, not an all-mountain ski. Stöckli publishes no weight, so paper comparisons come up empty.
Within Stöckli's line the WRT Pro sits at the race end. One tier down, the Laser WRT shares this geometry but drops the Titec Pro Titanal surface and the Race Base for a Carbon Steering Control build - a step down from the Pro. The Laser WRT Pro Marco Odermatt Edition is the same geometry and the same tech, a collaboration edition Stöckli publishes no construction difference for. For short, snappy turns the narrower Laser SL (120-66-98, 11.0-14.5 m) is the specialist; for an easier, more accessible multiturn the Laser SC (120-70-102) even offers a comfort binding option. Off the groomers a wider ski like Stöckli's Montero AX is the tool - Stöckli itself calls the AX at home on any terrain, and this is not.
Sizing is straightforward: the sidecut does not change, so length sets the radius - shorter for a quicker rhythm, longer for stability in bigger arcs. We stock the 166, 172 and 178. It sells flat and pre-drilled for the D20 plate, or as a system with the WRT 12 GW binding on the WRT D20 plate, mounted and adjusted to your boots in our shop; the WRT 12 GW takes GripWalk soles.
Bindings we'd pair with it
Mount point: Sold flat and pre-drilled for the D20 plate, or as a system with the WRT 12 GW binding on the WRT D20 plate. Our pick: WRT 12 GW on the WRT D20 plate (the system option).
- WRT 12 GW black on WRT D20 plateThe system pick
Stöckli's system pairing on the pre-drilled D20 plate; the WRT 12 GW is compatible with GripWalk soles. It is the system variant of this product, not a separate purchase.
Stöckli's workbook also lists WRT 12 and, on the SRT plate, SRT 12 configurations for the Laser line. Mounting and setup are done in-shop by a technician.
Common Questions
- Who is the Stöckli Laser WRT Pro for?
- Expert hard-snow carvers and ex-racers who want race technology without a FIS ski. Stöckli's page lists no skier level, but independent testing places it at expert - it rewards a skier who drives the front of the ski, and punishes a backseat stance.
- Is the Stöckli Laser WRT Pro a good powder ski?
- No - it is a hard-snow carver, not a powder ski. At 67 mm underfoot its float sat near the bottom of the test card, and independent testers list groomers as its only recommended terrain. For soft snow a wider ski, such as Stöckli's Montero AX, is the tool.
- What is the difference between the Laser WRT Pro and the standard Laser WRT?
- Same 119-67-101 mm geometry, different build. The Pro carries the Titec Pro Titanal surface and the Race Base; the standard Laser WRT drops both for a Carbon Steering Control construction - a step down from the Pro.
- How is the Laser WRT Pro different from the Marco Odermatt Edition?
- On paper they are the same ski. The Marco Odermatt Edition carries the identical geometry and the identical technology set; Stöckli publishes no construction difference between them, so the difference is the collaboration graphics, not performance.
- What lengths does the Laser WRT Pro come in, and which should I get?
- The line runs 158, 166, 172 and 178 cm on one 119-67-101 mm sidecut, so length sets the radius - 12.3, 13.7, 14.8 and 16.0 m in order. We stock the 166, 172 and 178. Go shorter for a quicker rhythm, longer for stability in bigger arcs.
- How much does the Stöckli Laser WRT Pro weigh?
- Stöckli does not publish a weight for the Laser line - the dealer workbook prints none and stoeckli.ch leaves the row empty - and we do not quote third-party scale numbers in its place.
- Does the Laser WRT Pro come with bindings?
- Both ways. It sells flat and pre-drilled for the D20 plate, or as a system with the WRT 12 GW binding on the WRT D20 plate. The WRT 12 GW is compatible with GripWalk soles; mounting and adjustment are done in-shop by a technician.
