1 / 6Ride Twinpig Snowboard 2026
In Stock — Ready to Ship
PTO Verdict
“The Warpig's short-and-wide magic in a true twin — park-focused volume shifting that rides switch as well as regular.”
Best for: Intermediate to advanced freestyle riders who split time between park and all-mountain. Switch riders who want volume-shifted benefits in a true twin. Riders who value pop and edge hold over ultra-soft jib flex.
Not for: Beginners still developing board feel. Pure park rats who want the lightest, softest jib stick possible. Aggressive high-speed chargers — the Warpig or Superpig are better fits.
At a Glance
Terrain
Ability Level
Description
The Twinpig is Ride's short-and-wide twin built around the same volume-shift logic as the Warpig — you size it down 3 to 6 centimeters from your normal twin and gain a board that rides longer underfoot than the number on the base suggests. The profile is standard camber end to end, centered, zero setback: that means consistent edge-to-edge snap and genuine pop off the tail, with none of the assisted float you get from a hybrid rocker setup. Flex sits at a 3 out of 10, medium-soft and press-friendly, so nose and tail presses come without a fight and butter lines are accessible without muscling the board. The asymmetrical quadratic sidecut — Ride's blend of three different radii along each edge — narrows the gap between heelside and toeside response, which you'll notice most when riding switch. Slimewalls construction swaps traditional ABS sidewalls for damping urethane and transfers energy cleanly into the edge; the hybrid glass layup stiffens the deck longitudinally while keeping the tips lively; urethane Impact Plates under each binding zone soak up hard landings without killing the board's playfulness. The sintered base is fast and holds wax well, and the Cleave Edge packs roughly 50% more steel where edges take the most punishment, for stronger edge hold and durability. This is a board built to range across the whole mountain — park laps, groomer butter sessions, side hits, and a few inches of fresh — without being a dedicated specialist at any one of those things.
The Twinpig is built for intermediate-to-advanced riders who want one quiver board and spend their days moving across the resort without a fixed agenda — throwing a 180 off a side hit, pressing a box, bombing a groomer, ending the afternoon in the trees. If you are a dedicated park rider who laps the pipe and hits large kickers as your primary activity, the medium-soft flex will feel limiting at speed and under the load of serious booters; step up to something stiffer or look at Ride's park-specific lineup. It's also not a powder board — there's no setback or taper here, so if deep-snow float is what you're after, the Warpig is the directional sibling for that. And the sizing-down convention is not for riders still working on edge control: a cambered twin ridden shorter than your normal length rewards confidence and precision, not hesitation, so if you're coming from a longer rockered setup, come talk to us before pulling the trigger.
| Shape | True Twin, volume-shifted |
|---|---|
| Flex | 5.5/10 |
| Profile | Twin Standard Camber |
| Core | Performance Core (Aspen + Bamboo + Paulownia) |
| Base | Sintered 4000 Ptex |
| Best For | Park / freestyle — size 3-6cm down, twin Warpig |
Specs
- Shape: True Twin Volume-Shifted
- Profile: Twin Standard Camber
- Flex: 5.5/10
- Waist: Wide (volume-shifted)
- Sidecut: Asymmetrical Quadratic Sidecut
- Core: Performance Core — Aspen, Bamboo, Paulownia
- Sidewalls: Slim Walls (3D composite over Slimewall material)
- Base: Sintered 4000
- Sizes: 136 / 142 / 148 / 151 / 154 / 156W / 157
Details
- Type
- Snowboard
- Vendor
- Ride
- SKU
- 196222939928
136
Ride Twinpig
By PTO Ski Team, Based on Ride's official 25/26 product page, its published technology entries and its own size chart and size-down guidance · Spec analysis
The take
“The Warpig's short-and-wide magic in a true twin — park-focused volume shifting that rides switch as well as regular.”
The Twinpig takes Ride's volume-shifted Pig concept and wraps it in a twin shape for freestyle. Ride prints the same tip and tail width at every length and says the shape is made for going both directions. The Twin Standard Camber — Ride calls it a slight traditional camber zone, responsive without being overpowering — gives it genuine pop for ollies and off lips while keeping landings forgiving.
The Asymmetrical Quadratic Sidecut is a real differentiator: Ride prints two radii per size and says the asymmetric shaping improves heelside turn initiation and control — it does not label which figure belongs to which edge, so we won't either. You notice it most on butters and carves where the heel edge usually feels vague. On groomers it holds an edge better than you'd expect from a freestyle board, and in powder the wide shape provides surprising float for a twin.
The honest knock: Ride publishes no weight for it, so we cannot give you a figure, and the camber underfoot means it will not press like a dedicated jib stick such as the Burton Kilroy or Capita Horrorscope. But that extra substance means it handles all-mountain terrain with more confidence than most park twins. Size down 3-6cm from your traditional twin size.
Bindings we'd pair with it
Mount point: Ride publishes no insert pattern for this board — tell us which bindings you are mounting and we will settle the hardware with you in the shop. Our pick: Union Force.
Union ForcePark / all-mountain freestyleMedium flex (6.5-7/10) matches the Twinpig's personality. Responsive enough for carving and jumps, flexible enough for presses and butters. Solid power transfer without being overkill for a freestyle-leaning setup.
- Union Ultra ManLighter / more playful
Softer flex and lighter build for riders who prioritize jibbing and low-consequence freestyle over all-mountain versatility.




