1 / 8Nitro Fate Pro 2027
Pre-order · Ships September 2026
PTO Verdict
“The Pro trades the standard Fate's forgiving Cam-Out camber for full camber — more edge, more pop, and less patience for a lazy back foot.”
Best for: Intermediate to expert women who ride the whole mountain — groomers, side hits and park — and want one directional-twin board that can be ridden hard and progressed on. Riders ready for full camber's edge hold and pop, and hard enough on their gear to want the reinforced binding zone and a fast sintered base.
Not for: First-season riders — full camber bites before you can reliably link turns, and the softer standard Fate suits that stage. Powder hunters: a no-taper twin will not float deep days the way a directional or tapered board does. Riders who want a soft, surfy presser will find the full-camber platform stiff and insistent; the Cam-Out standard Fate is the friendlier board for ground tricks.
At a Glance
Terrain
Ability Level
Description
The Nitro Fate Pro is a women's directional-twin snowboard built for all-mountain freestyle riding, and it sits a clear step above the standard Fate in how hard it wants to be ridden. Where the regular Fate uses Nitro's Cam-Out camber — camber softened with early rise at the tips for forgiveness — the Fate Pro runs full Trüe camber end to end. That is the load-bearing difference: full camber holds an edge on firm snow and stores pop, and it asks the rider to drive it rather than skid it. Nitro aims this one at intermediate to expert riders working the whole mountain, park included.
The shape is a directional twin, so it rides switch and spins in both directions while carrying a slight forward bias for composure at speed. A Dual Degressive sidecut smooths out turn initiation and keeps the ends from feeling grabby. Underfoot, a Powerlite core keeps the weight down and the pop lively, Carbon Tape adds snap, and Bi-Lite laminates keep the flex balanced rather than planky. Ballistic Impact Panels reinforce the binding zone for hard landings, and the Speed Formula II sintered base runs fast and shrugs off abuse.
This is not the board for a first-season rider — full camber bites if you are still learning to link turns, and the softer, more forgiving standard Fate is the smarter buy there. It is also not a dedicated powder board: it is a twin with no meaningful taper, so it planes like a freestyle deck, not a powder gun. Reach for it if you already ride the whole mountain and want one board to push hard and keep progressing on.
The Fate Pro comes in standard and wide widths, and width follows your boot size, not your height. The deck ships flat, and we help you pick the length and width and set your bindings in the shop.
Specs
- Shape: Directional Twin
- Camber: Trüe
- Core profile: Reflex Core Profile
- Width: Standard
- Sidecut: Dual Degressive
- Flex (Nitro): 8 / 10
- Terrain (Nitro): All Mountain 10 / Park 10 / Backcountry 8
- Waist width: 242 mm (146) · 244 mm (149) · 248 mm (152)
- Nose / tail width: 285/285 mm (146) · 287/287 mm (149) · 291/291 mm (152)
- Running length: 1090 mm (146) · 1120 mm (149) · 1140 mm (152)
- Sidecut radius: 9.6 / 6.4 / 9.6 m (146) · 10.1 / 6.7 / 10.1 m (149) · 10.7 / 6.8 / 10.7 m (152)
- Setback: -15 mm
- Rider weight (Nitro): up to 60 kg (146) · up to 65 kg (149) · 50-70 kg (152)
- Construction: Bi-Lite Laminates · Powerlite Core · Sintered Speed Formula II Base · Recycled Steel Edge · ABS Sidewall · Carbon Tape · Ballistic Impact Panels
- Sizes: 146 · 149 · 152
Details
- Type
- Snowboard
- Vendor
- Nitro
- SKU
- N11SB21033-101146
146
Nitro Fate Pro
By PTO Ski Team, Based on Nitro's official 2027 specs and dealer feature sheet — not yet ridden on snow · Nitro official specs and construction contrast with the standard Fate · Spec-based review
The take
“The Pro trades the standard Fate's forgiving Cam-Out camber for full camber — more edge, more pop, and less patience for a lazy back foot.”
The Fate Pro is the harder-charging member of Nitro's Fate family, and the clearest way to read it is against its own sibling. The standard Fate leans on Cam-Out camber, a cambered board with rocker eased into the nose and tail, which makes it patient and simple to slide while your technique is still coming together. The Fate Pro drops that rocker and runs Trüe, full camber the length of the board. Full camber gives more and asks more: it locks onto an edge and springs off the tail, but it will hang a lazy back foot out to dry.
On snow, the directional-twin outline is what keeps it flexible. The Pro spins and rides switch the way a twin should, but the directional set gives it a spine pointing downhill, so it settles instead of chattering when you let it run. The Dual Degressive sidecut pulls some of the bite out of turn-in, a sensible pairing with a full-camber deck. Carbon Tape and Bi-Lite glass hand it snap without turning it brittle, and the light Powerlite core makes it easy to throw around off a lip.
The construction is pointed straight at riders who beat on their gear. Ballistic Impact Panels stiffen the binding zone to take flat landings and daily park abuse, and the sintered Speed Formula II base is the fast, wax-hungry kind rather than the low-upkeep extruded kind — it hands back speed when you tune it. That base and the Carbon Tape are the real gap between the Pro and the standard Fate, and the reason the Pro sits higher in the line.
Who should skip it? A first-year rider — full camber is unforgiving while you are still finding your edges, and the softer standard Fate suits that stage far better. A powder specialist, too: the Fate Pro is a twin without real taper or setback, so it planes like the freestyle board it is and nothing more. And a rider chasing a soft, surfy presser will find the full-camber feel stiffer and more insistent than the Cam-Out Fate delivers.
Sizing is a boot call as much as a height call. Standard and wide widths are offered, and the wide is for riders whose boots would otherwise hang over the edge and catch in turns — not a heavier-rider decision. Nitro does not publish a numeric flex or a per-size waist for this board, so if you are caught between lengths, come talk to us and we will match it to your boots and the way you ride.
Bindings we'd pair with it
Mount point: Ships as a flat deck — we mount and dial your bindings with you in the shop. Our pick: A medium to medium-stiff all-mountain binding.
- Medium to medium-stiff all-mountain bindingEveryday all-mountain and park
A response-matched binding lets the Fate Pro's full camber and carbon do their work without overpowering the board, so it stays quick edge to edge and calm when you let it run.
- A softer freestyle bindingPark-leaning setups
Dropping a step in binding stiffness keeps presses and jibs easier for riders who spend most of the day in the park.
Common Questions
- How is the Fate Pro different from the standard Nitro Fate?
- The standard Fate uses Cam-Out camber — camber with early rise blended into the tips — so it rides softer and more forgiving. The Fate Pro switches to full Trüe camber, adds Carbon Tape and a sintered Speed Formula II base, and lands stiffer, snappier and aimed higher up the skill range.
- Is the Nitro Fate Pro a good board for beginners?
- No. Full camber grips hard and forgives little, so a first-season rider is better served by the softer standard Fate. The Fate Pro is built for riders who already link turns and ride switch.
- Can the Fate Pro handle powder?
- It handles soft snow like a freestyle deck, but with a twin outline and no real taper it is not a powder board. If deep days are your priority, a directional or tapered shape floats better.
- How do I choose between the standard and wide Fate Pro?
- Pick width by your boot, not your height or weight. If your boots would overhang a standard waist and catch in turns, the wide is the right board. We can measure it against your boots in the shop.