1 / 4Burton Family Tree Full Nelson Camber Snowboard
In Stock — Ready to Ship
PTO Verdict
“A Family Tree board that wants to be driven: stiff, wide, and steady as the pace climbs.”
Best for: Strong directional riders who ride powder, trees and open faces fast and want Burton's Stiff & Aggressive rating. It suits riders who would trade easy pop for a planted, powerful carve, the trade the same-day comparison describes, and riders who hit chopped-up snow at speed, where that test found it more stable than a softer Burton.
Not for: Park riders and anyone who likes to butter and ollie down the hill are on the wrong board: the same-day test found ollies and butters came harder than on a softer Burton. For forgiveness, look at Burton's Cartographer, the softer board in that test; for the playful side of the new Family Tree pair, the Time Thief, which an independent line overview calls the more playful of the two. And if soft-snow float is the whole reason you are buying, the independent tests used here were on firm spring snow; the float claims on this page are Burton's.
At a Glance
Terrain
Description
The Burton Family Tree Full Nelson Camber is a stiff, wide directional board for powder days and fast freeride terrain, and of the four Family Tree models whose specs we compared, the only one Burton rates Stiff & Aggressive. Burton shaped it around the Kootenays and BC's Powder Highway, and 26/27 is its first season in Burton's line.
The profile is Directional Camber, with camber under both feet and a rockered nose, paired with a Directional flex, 6mm of taper and a -22.5 stance location on Burton's chart. Width does the heavy lifting. The 153 measures 258mm at the waist and the 157 measures 265mm, and Burton's own sizing guide links extra waist width to float and to bigger boots. Burton gives it long sidecuts, 8.0m on the 153 and 8.2m on the 157, to keep edge hold predictable on steeps at speed, and credits tail wingers with added float and glide in deep snow.
The build is an FSC Certified Super Fly II 700G core with Dualzone EGD running along both edges, Triax fiberglass and a wax-infused Sintered WFO base. Pro-Tip thins the tip and tail to trim swing weight.
It suits strong riders who drive their turns, want float without moving to a W size, and care more about composure at speed than about tricks. It is the wrong board for park laps, since Burton's Park slider stops at 30%, and for riders who want forgiveness, since Stiff & Aggressive is the top step of Burton's three-step scale. By Burton's own sizing logic, small boots on a 265mm waist will be slow from edge to edge.
This page covers the 153 and 157 in Space; Burton's full run is 149 to 165, with no W sizes. The board ships without bindings. Buy it from us and we mount them on The Channel and set your stance. We also check your boots against the waist before you ride.
Specs
- Style number: 307831
- Bend: Directional Camber
- Shape: Directional
- Flex: Directional
- Core: FSC™ Certified Super Fly II™ 700G Core with Dualzone™ EGD™
- Fiberglass: Triax™
- Base: Sintered WFO
- Mounting: The Channel®
- Taper: 6mm
- Features: Pro-Tip™, Infinite Ride™
- Sustainability: Made with FSC® certified materials, FSC-C124994 FSC® 100%, SGSHK-COC-360166
- Burton terrain rating: Park 0–30% · All Mountain 0–80% · Powder 0–100%
- Burton personality (flex feel): Stiff & Aggressive
- Weight Range: 120-180 lb. / 54-82kg (153) · 150-200 lb. / 68-91kg (157)
- Waist Width: 258mm (153) · 265mm (157)
- Stance Location: -22.5 (153) · -22.5 (157)
- Binding Size: Men's L, Women's L (153) · Men's L, Women's L (157)
- Running Length: 1055mm (153) · 1085mm (157)
- Sidecut Radius: 8.0m (153) · 8.2m (157)
- Sidecut Depth: 17.5mm (153) · 18.0mm (157)
- Stance Width: 530mm (153) · 560mm (157)
- Nose Width: 296.0mm (153) · 304.0mm (157)
- Tail Width: 290.0mm (153) · 298.0mm (157)
- Effective Edge: 1128mm (153) · 1160mm (157)
- Sizes listed: 153 · 157
Details
- Type
- Snowboard
- Vendor
- Burton
- SKU
- 3078311ACF
- UPC / GTIN
- 197183365856
Space / 153
Burton Family Tree Full Nelson Camber
By PTO Team, Based on Burton's published specs and independent reviews
Spec analysis · Analysis dated
These 10-point scores express PTO's editorial assessment of suitability for each use. They are not customer ratings or instrumented measurements; the analysis below explains the trade-offs.
The take
“A Family Tree board that wants to be driven: stiff, wide, and steady as the pace climbs.”
The Burton Full Nelson's first season raises one question worth settling before you buy: which half of Burton's pitch has been checked on snow. Burton sells it on surfy float when it gets deep and on predictable edge hold on steeps at high speed, and the independent reports used here cover the second half.
The Full Nelson's firm-snow record comes from a reviewer who rode it on the same April 2026 day as Burton's Cartographer, on mid-firm groomers and icy off-piste. Measured against that board, which the reviewer put near 5/10, the Full Nelson was noticeably stiffer, carried more power through a carve, stayed more composed and planted as the speed rose, and was more stable and powerful through chopped-up snow. That reviewer also found it noticeably harder to ollie and to butter, and called the softer Cartographer more forgiving and easier to ride. A second reviewer, testing the Time Thief against it in late-spring snow, rated the Full Nelson a very fun turner but preferred the Time Thief.
The Full Nelson's deep-snow case therefore rests on Burton's description and the board's numbers. Among the four Family Tree boards in our spec comparison, the 153's 258mm waist is wider than any other model's standard size from 152 to 157, and the 157's 265mm beats even the Hometown Hero's 156W (260mm) and the 158W versions of the Custom, Custom X and Counterbalance. Taper works the other way: at 6mm it is modest, and Burton's own Family Tree guide says smaller taper gives up some float for edge control.
For tighter turns, the Hometown Hero runs 7.2m and 7.4m radii on its 152 and 156. Outside the Family Tree, the Custom X is the other Stiff & Aggressive board with a directional shape among the 14 Burton boards whose 26/27 specs we compared, a camber board whose Powder slider stops at 70%.
The Full Nelson's two sizes here split by rider weight: Burton's weight bands put the 153 at 120-180 lb and the 157 at 150-200 lb, and Burton recommends Men's L or Women's L bindings on both. Burton publishes no board weight, numeric flex, winger dimensions or boot-size range. If your weight sits in the 150-180 lb overlap, let your boots choose between the 258mm and 265mm waists. Either way, buy it for the carve and the composure at speed that testing has already shown, and count the float as Burton's claim for now.
Bindings we'd pair with it
Mount point: The Channel. Burton's chart sets stance location at -22.5 on every size, with a 530mm reference stance width on the 153 and 560mm on the 157. Our pick: Burton Cartel X Re:Flex, our pick rather than Burton's own pairing.
- Burton Cartel X Re:FlexMatching a Stiff & Aggressive board
Burton's 25/26 Cartel X Re:Flex page rates it Stiff & Aggressive, the same Personality label Burton gives this board.
- Burton Women's Lexa X Re:FlexWomen's binding sizes
Burton's chart lists Women's L bindings for both sizes on this page, and the Lexa X Re:Flex carries Burton's Stiff & Aggressive label on its 25/26 page.
Burton says The Channel is compatible with all major bindings. Burton's own page pairs this board with its Step On Genesis EST binding and Highshot X Step On boots, and Burton states Step On bindings are only compatible with Step On boots. If the board comes from us, we mount your bindings and set your stance.
Common Questions
- Is the Burton Full Nelson new for 26/27?
- Yes. It is absent from Burton's 2025 and 2026 Family Tree line-up posts, burton.com shows only a 26/27 page for it, and an independent 2027 line overview lists it among Burton's new boards. That overview adds that it covers some of the powder and freeride ground left by the retired Alekesam without being a direct replacement.
- Full Nelson or Smooth Operator for deep snow?
- Burton sets the Powder slider at 0–100% on both. The Full Nelson is Stiff & Aggressive with 258mm and 265mm waists at 153 and 157 and 6mm of taper; the Smooth Operator is Happy Medium with 247mm and 251mm waists at 152 and 156, 10mm of taper and 3D concave tip and tail shaping. Pick the Full Nelson for stiffness and width, the Smooth Operator for Burton's Happy Medium Personality and its 3D base.
- What size Burton Full Nelson should I get?
- Burton rates the 153 for 120-180 lb and the 157 for 150-200 lb, and lists Men's L or Women's L bindings for both. Burton publishes no boot-size range, so bring your boots and we will check them against the 258mm and 265mm waists. Burton's chart also includes a 149, 161 and 165.
- What bindings work on the Full Nelson?
- The board ships bare and uses The Channel, which Burton describes as compatible with all major bindings. Burton's page suggests its Step On Genesis EST, a Step On binding that Burton says works only with Step On boots. Our strap-binding pick is the Cartel X Re:Flex, which shares the board's Stiff & Aggressive label.
- Is the Full Nelson a good board for intermediate riders?
- Burton prints no riding level for it and gives it the Stiff & Aggressive label. Of the Family Tree boards whose specs we compared, only the Hometown Hero carries Burton's Intermediate and Expert riding-level listing. The same-day comparison used here favored a softer Burton for forgiveness.
- How much does the Burton Full Nelson weigh?
- Burton does not publish a board weight or a numeric flex rating for the Full Nelson. Its stiffness is described only by the Directional flex row and the Stiff & Aggressive Personality label.