1 / 3Burton Men's Custom X Camber Snowboard
In Stock — Ready to Ship
PTO Verdict
“Same outline as the Custom, a Stiff & Aggressive build, and a board that wants speed under it.”
Best for: Expert riders who carve hard at speed on groomers, launch off kickers and larger jumps, and want a stiff camber board that answers precise input. It suits riders who already like the Custom's shape and want the Stiff & Aggressive version of it, and aggressive riders after one board who seldom see deep powder, which is how the 2025-model reviewer frames it.
Not for: Anyone short of expert has the wrong board here: Burton tags it Expert only, and the 2025-model reviewer warns that even intermediates are likely to find it hard work. Powder-first riders should look at the Smooth Operator or Full Nelson, which Burton bars at 100% for powder. Riders who want an easy board at slow speed will get more from the Custom Camber, which turned and popped more easily in one reviewer's same-day test and costs $220 less. Riders who spend fast days on rough, choppy snow and want a muted ride should look elsewhere: one review, whose test board's year is not stated, found it chattery, although the 2025-model review rated its crud stability above average. Rail riders can skip it: Park stops at 60% on Burton's bars, and the two reviews cited here both declined the jib line.
At a Glance
Terrain
Ability Level
Description
The Burton Custom X Camber is an all-mountain snowboard for expert riders: a camber bend on a directional shape with a twin flex, in a build Burton rates Stiff & Aggressive, the top step of its three-step personality scale. Burton sums it up as hard-charging precision in a high-end, pro-caliber board. For 26/27 it wears the Etched graphic, a 3D base print under a quieter topsheet.
Inside, the Dragonfly 600G core uses end-grain woods in impact zones, which Burton says trims weight without costing strength. The High Voltage version of Burton's 45° Carbon Highlights glass lays a full tip-to-tail carbon layer and adds carbon strands that Burton says give the board extra life, and Burton sums up the pairing as a stiff, fine-tuned flex loaded with energy. The profile is camber, which Burton credits with powerful turns and poppy precision; the base is wax-infused Sintered WFO, and the stance location sits at -12.5 on every size.
This board is built for riders who carve fast on groomers and hit kickers and bigger jumps. It is the wrong board for intermediates, for deep-powder days, for rails, and for anyone who wants an easy, forgiving ride at slow speed. Burton's riding-level tag lists Expert only.
Its sibling in Burton's line is the Custom Camber, and the review below covers what separates the two. The 158W is the only wide size here: at 262 mm its waist runs 10 mm wider than the 156's, so choose it by boot size. The board is sold without bindings. We help you choose the length and match the waist width to your boot size. If you buy the board from us, we also mount your bindings on the Channel.
Specs
- Style number: 106891
- Bend: Camber
- Shape: Directional
- Flex: Twin
- Core: Dragonfly™ 600G Core with Multizone EGD™
- Fiberglass: 45° Carbon Highlights High Voltage
- Base: Sintered WFO
- Mounting: The Channel®
- Features: Pro-Tip™, Infinite Ride™
- Riding Level: Expert
- Sustainability: Super Sap® Epoxy
- Burton terrain rating: Park 0–60% · All Mountain 0–90% · Powder 0–70%
- Burton personality (flex feel): Stiff & Aggressive
- Weight Range: 120-180 lb. / 54-82kg (154) · 150-200 lb. / 68-91kg (156) · 150-200 lb. / 68-91kg (158W)
- Waist Width: 250mm (154) · 252mm (156) · 262mm (158W)
- Stance Location: -12.5 (154) · -12.5 (156) · -12.5 (158W)
- Binding Size: Men's L, Women's L (154) · Men's L, Women's L (156) · Men's L, Women's L (158W)
- Running Length: 1125mm (154) · 1145mm (156) · 1165mm (158W)
- Sidecut Radius: 7.6m (154) · 7.8m (156) · 7.9m (158W)
- Sidecut Depth: 20.8mm (154) · 21.1mm (156) · 21.5mm (158W)
- Stance Width: 530mm (154) · 530mm (156) · 560mm (158W)
- Nose Width: 291.5mm (154) · 294.3mm (156) · 305.0mm (158W)
- Tail Width: 291.5mm (154) · 294.3mm (156) · 305.0mm (158W)
- Effective Edge: 1175mm (154) · 1195mm (156) · 1215mm (158W)
- Sizes listed: 154 · 156 · 158W
Details
- Type
- Snowboard
- Vendor
- Burton
- SKU
- 106891CE0B
- UPC / GTIN
- 197183364323
Etched / 154
Burton Custom X Camber
By PTO Team, Based on Burton's published specs and independent reviews
Spec analysis · Analysis dated
These 10-point scores express PTO's editorial assessment of suitability for each use. They are not customer ratings or instrumented measurements; the analysis below explains the trade-offs.
The take
“Same outline as the Custom, a Stiff & Aggressive build, and a board that wants speed under it.”
Burton's Custom X Camber carries into 26/27 with the construction Burton listed for the 2025 and 2026 models, so the 2025-model review below describes the same listed build. It shares every chart number with the Custom Camber at the sizes both come in, so the extra $220 buys a different layup and label rather than a different shape: a Dragonfly 600G core and High Voltage glass where the Custom has a Super Fly II 700G core and 45° Carbon Highlights, an Expert-only tag, and a Personality bar Burton draws at the Stiff & Aggressive end where the Custom's sits mid-scale.
One reviewer rode the Burton Custom X back to back with the Custom, both 2025-model 156s on man-made dust over crust with icy patches. He called the X an absolute carving beast on long, fast arcs that was still good in shorter turns at moderate speed, and measured 12 mm of camber at its highest point. The same session showed the costs: harder to start a turn than the Custom, catchier at slow speed, if not super catchy overall, and pop that took more work to reach. At really high speed he also found a ceiling, which he put down to it being a little more forgiving than older Custom Xs.
The two reviews of the Burton Custom X split on rough snow. The 2025-model reviewer rated it more stable than the average board in crud and damper than the Custom. A long-running review covering the 2023 to 2025 models, ridden on a 158, a length not listed here, in spring snow by a 185-190 lb rider, reports the opposite: more chatter than the Custom, bucking in uneven soft snow, edges letting go on hard patches, and less damping at speed than older Custom Xs. That review does not say which year its test board was; no 2023 Custom X page is archived, and Burton's 2024 page carried a Squeezebox tag in 2023 that later lists drop. The two reviews do agree on big pop off kickers, on keeping it off the jib line, and on powder float that neither rates above average.
The Burton Custom X gets a 0–70% Powder bar from Burton, above the Custom's 0–60% on an identical shape, yet for deep days the Smooth Operator, also $899.95, and the Stiff & Aggressive Full Nelson both reach 100%. On length, the 180 lb 2025-model reviewer would have taken a longer board than his 156, and the 185-190 lb rider in the other review felt over the weight limit on his 158, a length not listed here. Each rode a regular width, so among the sizes listed here the 156 is the longest regular option, and the 158W, the wide at 262 mm, is a boot-size choice rather than a weight one.
Bindings we'd pair with it
Mount point: The Channel. Stance location -12.5 across the size run on Burton's chart; reference stance 530 mm on the 154 and 156, 560 mm on the 158W. Our pick: Burton Cartel X Re:Flex.
Burton says The Channel is compatible with all major bindings, and says Re:Flex bindings work with all major board mounting systems. Its guidance on which disc and hardware a Re:Flex binding needs on the Channel is not consistent across its pages, so we confirm both with you, and we mount bindings on boards bought from us. These pairings are suggestions, not compatibility limits.
Common Questions
- Is the 26/27 Burton Custom X different from the 25/26?
- No construction change is listed. Burton's 2025 and 2026 model pages carry the same spec list, bars and chart dimensions as the 26/27 page, and the $899.95 price matches 25/26. The graphic here is Etched, which is new for 26/27.
- What is the difference between the Burton Custom X and the Custom Camber?
- The two share bend, shape, twin flex, base, mount and every chart number at common sizes. The Custom X uses a Dragonfly 600G core with Multizone EGD and High Voltage carbon glass, is tagged Expert only, sits at Stiff & Aggressive on Burton's Personality scale where the Custom is Happy Medium, and lists at $899.95 against $679.95. Riding the two on one day, a reviewer found the X more stable at speed and more damp, while the Custom was easier to start turning and to pop.
- What does High Voltage mean on the Burton Custom X?
- It is Burton's name for the Custom X's glass: its Carbon Highlights layup with carbon strands added. Of the 14 Burton 26/27 boards we compare, only the Custom X lists it, and Burton gives no stiffness or weight figure for what the extra carbon changes.
- What size Burton Custom X should I get?
- Burton rates the 154 for 120–180 lb and the 156 and 158W for 150–200 lb, and publishes no boot-size range. The 158W is the wide one, with a 262 mm waist to the 156's 252 mm, so choose between those two by boot size, not weight. The two reviewers at 180-190 lb each wanted more length than they rode, and no regular-width size here runs longer than the 156.
- Is the Burton Custom X good for intermediate riders?
- Burton lists it for Expert riders only. The 2025-model reviewer rules out beginners, thinks even intermediates would likely struggle, and places it with advanced to expert riders; the 2023 to 2025 review calls it best for expert riders. The Custom Camber, tagged Intermediate and Expert, is the same shape with a Happy Medium build.
- Is the Burton Custom X good in powder?
- Burton bars it 0–70% for powder, but neither review rates its float above average: one expects a back-leg burner in deep snow, the other found it back-foot heavy even in a little messy powder. If float comes first, the Smooth Operator and Full Nelson run Burton's powder bar to 100%.
- Does the Burton Custom X come with bindings?
- No, it is a board only, on Burton's Channel mount. Burton pairs it with its X EST binding, which mounts only on Channel boards; for the binding you choose, we confirm compatibility, disc and hardware, and we mount it when the board is bought from us.