1 / 3Atomic Bent Decode Skis 26/27
Pre-order · Ships mid-September 2026
Need binding mounting?
We’ll mount your bindings and set your DIN. FREE with full setup (ski + boots + bindings).
PTO Verdict
“Atomic's Bent line finally has a true park ski: narrow and light, precise but poppy, and honest about giving up carve and float for it.”
Best for: Park-focused skiers - jumps, rails, presses and switch - who want a ski precise enough to reward good technique but forgiving enough to keep progressing on. It suits riders who go switch as often as forward, want low swing weight for spins, and are glad to trade firm-snow grip and powder float for pop and play.
Not for: Skiers chasing a carver should pass: the Decode's torsion is soft, and firm snow and steeps ask for edge hold it doesn't have. Powder-first skiers should pass too - it is narrow and short on float, so deep days call for a wider ski: the Bent 100 for all-mountain range, or a dedicated powder ski for the deepest days. And it is not built to be a do-everything ski: the Decode is park-first, where the Bent 90 and Bent 100 are the all-mountain Bents. If your idea of park is wide, smooth and flowy, a wider board will suit you better than this one.
At a Glance
Terrain
Pair It With
Compatible ski bindings.
Browse our recommended binding brands for this ski.
Description
The Atomic Bent Decode is a park ski, 90 to 93mm underfoot, and the first Bent built park-first rather than all-mountain. Where the rest of the Bent family leads with all-mountain range, the Decode flips the priority and lives in the terrain park.
Its profile is a park rocker, cambered through the middle with rise at both the tip and tail, laid over a poplar light woodcore. That keeps it quick and playful instead of heavy and locked in. The HRZN 3D Park tip is cut into a slim shape to drop swing weight, which is what makes the ski easy to spin and to butter. A full-width layer of ABS, called ABS CoreGuard, sits under the core to take repeated hard landings and everyday rail wear, backed by a reinforced park edge. Atomic also opens the factory base bevel a touch versus the other Bents, so the ski catches less on jibs and switch landings.
This one is for a park-focused skier: jumps, rails, presses, and progressing through slopestyle, with a symmetric rocker that rides switch with no penalty. It is not a carver — soft torsion means it won't grip hard on firm snow — and at this width with a centered mount it doesn't float in deep powder. If you want one ski for the whole mountain, look at the Bent 90 or 100 instead.
There is no binding on the Bent Decode out of the box; it is a flat ski, and the binding is bought and fitted separately. Bring your boots and let us know your height, your weight and how you ride, and the shop will choose the length, pair a binding, set the brake width, and mount everything for you.
Specs
- Waist Width: 90-93 mm by length
- Sidecut (tip-waist-tail, mm): 118-90-112 (158) · 120.5-91-114.5 (167) · 123-92-117 (176) · 125.5-93-119.5 (185)
- Turn Radius: 15 m (158) · 16 m (167) · 17 m (176) · 18 m (185)
- Profile: Park Rocker 20/60/20, HRZN 3D Park
- Construction: ABS CoreGuard, Light Woodcore, Dura Cap Sidewall, Resist Edge Park
- Weight: 1,850 g per ski (177 cm, manufacturer stated)
Details
- Type
- SKI
- Vendor
- Atomic
- SKU
- AA0031034158
- UPC / GTIN
- 00887445516156
158 cm
Atomic Bent Decode
By PTO Team, Based on official specs and early professional review · Spec analysis + early professional review
The take
“Atomic's Bent line finally has a true park ski: narrow and light, precise but poppy, and honest about giving up carve and float for it.”
The Atomic Bent Decode is the first ski in Atomic's Bent line drawn up for the park first and the rest of the mountain second, and how it rides comes straight out of that call. The build is narrow at 90 to 93mm, light at about 1,850 grams per ski, and stripped down: a poplar light woodcore, a park rocker that is mostly camber - roughly 20% rocker at the tip, 60% camber, 20% rocker at the tail - and no metal laminate at all. None of that adds up to a heavy ski - the Decode swings quick, bends easily, and feels lively underfoot, which is what a park skier is after.
On snow, one early independent review finds the Decode's flex round and even from tip to tail, a step softer than the Bent 90, with enough rebound to feel alive. That same review calls it precise enough to reward a clean pop and a stomped landing, yet forgiving when the timing runs slightly early - ollies, nollies and switch landings all come easy. The slim HRZN 3D Park tip holds the swing weight down, so spins and presses stay light.
Away from the jumps the Decode will cruise a groomer and slash a side hit, but be honest about the ceiling. Its torsion is soft, so it won't lock an edge or bite a hard carve on firm snow the way a stiffer all-mountain ski does. Float is the other limit: this is a narrow ski, and it gives up ground in deep snow, so a powder ski this is not. And Atomic's official shape is directional, tip about 6mm wider than tail, so the 'true twin' you'll read about describes how neutral it feels riding switch, not a symmetric sidecut.
Inside the Bent family, the Decode's trade-off is easy to name. Step over from the Bent 100 and you swap float and all-mountain composure for precision and play in the park; step over from the more directional Bent 90 and you swap bump and all-mountain range for a shorter radius and a real park bias. Against the wider K2 Reckoner, one review set the two at opposite ends of the top-park bracket - the Reckoner smoother and more surfy, the Decode livelier and sharper. Choose the Decode when the park is home and the rest of the mountain is just the ride between laps.
The Bent Decode runs in four lengths from 158 to 185cm, and as the sidecut grows the radius stretches from 15 to 18 meters - a short-to-medium park arc. Most park skiers pick at or a touch under their all-mountain length to stay quick to spin and press; ride bigger jumps or ski faster and heavier, and size up. MSRP is $850, and because it ships flat you'll add a binding and mounting on top - we'll size the brake to the 90-to-93mm waist and dial it to your boots.
Bindings we'd pair with it
Mount point: Sold flat - the binding is a separate purchase and needs mounting. Independent reviews run a centered, twin-style park mount; Atomic publishes no recommended mount point. Our pick: Look Pivot 12 GW.
- Look Pivot 12 GWMost park skiers
Our default binding suggestion for most park skiers on the Decode.
- Look Pivot 15 GWHeavier or harder-charging skiers
Suggested instead when you ski heavier or harder.
No binding ships with the Bent Decode and Atomic publishes no recommended pairing, so these Look Pivot options are shop suggestions, not official pairings. The right model depends on your weight, boots and how you ski; the brake width needs to clear the ski's waist, and a technician sets the release setting and mounts it.
Common Questions
- How is the Atomic Bent Decode different from the Bent 90?
- The Bent 90 is an all-mountain ski that also skis park; the Decode is built park-first. The Decode is more symmetric, shorter in radius and softer-flexing, while the Bent 90 is more directional and stronger across the whole mountain.
- Can the Atomic Bent Decode carve or ski powder?
- Not really. Its torsion is soft, so it will not hold a hard carve on firm snow, and at 90 to 93mm its float is limited. It will cruise groomers and handle bumps and side hits, but firm-snow grip and deep-powder float are not what it is for.
- What length Atomic Bent Decode should I get?
- It comes in 158, 167, 176 and 185cm, with a radius of 15 to 18 meters. Park skiers often pick at or just under their normal all-mountain length to keep it quick to spin; bigger jumps and heavier or faster skiers lean longer. Tell us your height, weight and ability and we will help you choose.
- Does the Atomic Bent Decode come with a binding?
- No. The Decode ships as a flat ski, so you buy and mount a binding separately. Atomic doesn't name a recommended binding; we'll suggest one, fit a brake that clears the waist, and set it up to your boots. A technician sets the release setting.
