1 / 2MARKER Squire 10 Bindings 26/27
Pre-order · Ships mid-September 2026
Description
The Marker Squire 10 is an alpine binding adjustable from DIN 3 to 10, part of Marker's Royal Family range, and Marker aims it squarely at people new to freeride and freestyle skiing. The hardware: the toe unit is the Triple Pivot Light 2, the heel is a Compact, a gliding AFD sits beneath the toe, and the brake is a freeride design. Marker's stated case for the Compact 3 heel is that it takes very little effort to step into, and the Anti Ice Rail on the toe is there to keep packed snow and ice off the boot sole so it seats properly.
Two things decide whether this binding fits your setup, and neither is price. The first is the release range: if a technician sets you above DIN 10, the Squire 10 is out regardless of anything else. The second is brake width. Marker offers this one in 85 mm and 100 mm; the model directly above it in the range reaches 110. Skis wide underfoot are therefore ruled out on geometry, whatever your budget says. A smaller point of difference: Marker publishes a stand-height figure for both bindings in the same field, and the Squire 10's is the smaller of the two.
On boots, Marker names Alpine Adult Sole (ISO 5355 A) and GripWalk Adult Sole (ISO 23223 A). Touring soles under ISO 9523 do not appear anywhere in what Marker publishes for this model — that is not a statement they will fail, but it does mean no one can promise you they fit. GripWalk support is declared for each binding individually and never inherited across a brand's range, so this is a check to run on the exact model.
What we can do is match the brake to your skis, mount them, and set your release values on a calibrated bench. The DIN window is an indicator scale rather than a measured release torque, so the number you actually ski is a technician's determination made against your own boot.
Details
- Type
- Ski Bindings
- Vendor
- Marker
- SKU
- 7224V1.MA
- UPC / GTIN
- 883295402595
Black/Anthracite / 85
Marker Squire 10
Squire family · 26/27
DIN 3–10
Brake Widths
Choose a brake equal to or slightly wider than your ski waist
Boot Sole
815 g per binding
Marker is specific about who this is for, and the two things it publishes point the same way. The prose calls it a starting point for newcomers to freeriding and freestyle - new to that terrain, not new to skiing - and the spec table rates the ability level intermediate to advanced. Read together: someone who can already ski, stepping into the park and off-piste. What decides it for you is still the release value a technician sets you at.
One thing Marker leaves unpublished is worth naming, because it is exactly what a buyer at this price would want to weigh: the housing materials for the toe and heel are not disclosed anywhere. We would rather hand you that gap than fill it with a guess about what a cheaper binding gives up. The mass it does publish is 815 g per binding.
The rest is arithmetic you can finish before preference enters it: check the release range, then check the brake. Either one can end the conversation.
Best For
Skiers new to freeride and freestyle whose release setting sits inside DIN 3-10, on Alpine or GripWalk soles, mounting skis narrow enough for an 85 or 100 mm brake.
Not For
Anyone on skis too wide for a 100 mm brake - the Squire 11 goes to 110 and this one simply does not. Anyone a technician sets above DIN 10. And touring boots: Marker does not list ISO 9523 here, so it is not something we can promise.
Common Questions
- What is the difference between the Marker Squire 10 and the Squire 11?
- Brake width and heel are the differences you can act on. This one is built at 85 and 100 mm; the Squire 11 adds a 110 mm brake. The heels differ too, Compact here against Hollow Linkage 2 on the Squire 11. On release range Marker's own catalog and website do not agree about where the Squire 11 tops out, so let the number a technician sets you at decide, not the model name. If your skis need a 110 mm brake, that settles it anyway.
- Do Marker Squire 10 bindings work with GripWalk boots?
- Yes. Marker lists this binding for GripWalk soles to ISO 23223 A, along with alpine soles to ISO 5355 A. GripWalk support is declared per binding model and does not carry across a brand line, so confirm it on the exact binding you are buying.
- What boot sole lengths does the Marker Squire 10 fit?
- Marker gives a boot sole length range of 240 to 360 mm. Your boot sole length is printed on the side of the boot heel in millimeters - bring the boots in and we will confirm the fit before mounting.
- Is the Marker Squire 10 strong enough for an aggressive skier?
- That is a question for a technician, not a spec sheet. The binding adjusts between DIN 3 and 10. Whether your correct setting lands inside that range is something a technician works out on a calibrated bench with your own boot. If it comes out above 10, you need a different binding.
Compare — Similar DIN Range
Other bindings at PTO in the DIN 3–10 range
